Taking the Main Dash Bracket (A) place the Left Clamp
Bracket (C) on to the stud. Fit Plain Washer (F) on top of
the Left Clamp Bracket (C). Put the Lock Washer (G) on
top and secure with a Wing Nut (H). Repeat for Right
Clamp Bracket (B).
Place the Antenna Dash Bracket (E) on the last stud of the
Main Dash Bracket (A). Fit Plain Washer (F) on top of the
Antenna Bracket (E). Next put the Lock Washer (G) on top
and secure with a Wing Nut (H).
Take the R/O Dash Bracket (D) and mount piece to
the Main Dash Bracket (A) with a Flathead Screw
(I). Repeat for the other side of the Main Dash
Bracket (A).
***Depending on which radar unit you’re using will determine which
holes to line up on the Main Dash Bracket (A).***
Place the Flat Nylon Washer (J) onto the antenna stud
and insert the stud through the mount on the Antenna
Dash Bracket (E). Add the Regular Plain Washer (K)
separating the Antenna Dash Bracket (E) and the Star
Knob (L).
Taking both Stud Knobs (O), place a Regular Plain Washer
(N) onto the studs followed by a Nylon Flat Washer (M).
Put through the holes of the R/O Dash Bracket. Add
another Nylon Flat Washer (M) separating the unit from the
R/O Bracket (D). Put the radar unit into place. Secure with
studs.
Mount the fully constructed bracket into the
vehicle. Adjust the radar unit and antenna to your
personal aesthetic. Secure all fastening pieces
(wing nuts, antenna stud and radar stud).
1
2
3
4
5
6
7
H
G
B/C
F
A
H
G
E
F
A
I
D
A
J
E
K
L
O
N
M
D
M
Installation Process
H
A
G
F
F
G
E
A
J
K
O N
M
M
D
L
I
A
E
A
H
D
B
C
Bracket Assembly
Part# ai.951689
2013+ Chevy Tahoe
