ENGLISH
A. CONNECT HARDWARE
Follow the steps below to connect the
hardware:
1.
Power off your printer.
2.
Connect the Bluetooth Printer Adapter to the USB port of
the printer using the enclosed cable.
3.
Power on the printer.
4.
Connect the included power adapter to the Bluetooth
Printer Adapter and to the power outlet. Turn on the
power.
5.
The test page is printed after approx. 10 seconds. The
Bluetooth Printer Adapter can now be used for Bluetooth
printing.
B. PRINTING
1.
Further instructions for Bluetooth Printing are available at
www.mpitech.com/bpa
C. ADDITIONAL PRINT OFTEST PAGE
Press the Bluetooth Printer Adapter's TEST button to print the
test page. The test page contains information about the software
version (501.xxx) and the Bluetooth Device Address
(00:03:6E:XX:XX:XX).
Congratulations with your Bluetooth Printer Adapter from MPI
Tech. This document will assist you in getting started with
Bluetooth printing.
