106
4
EMULATION MENU
PGL Normal
This option determines whether PGL passes the text data in Normal mode or
whether PGL will print the data text itself.
•
LP+ Menu
(factory default). PGL will pass the text data to the menu only
in default setting state.
•
PGL Menu
. PGL will always print the text data itself.
UPC Descenders
This parameter allows you to print bar code descenders when human
readable data is not presented in the UPC/EAN bar codes.
•
Always
(factory default). UPC/EAN bar codes are printed with
descenders, even if there is no human readable data.
•
Never
. UPC/EAN bar codes are printed without descenders if the PDF
command is present.
•
Only With PDF
. UPC/EAN bar codes are printed with descenders only
when the PDF command is presented.
I-2/5 Selection
This option is added to be compatible with a special IGP-X00 customization.
Usually, if Interleaved 2/5 bar codes have an odd number of digits, a leading
zero is inserted in front of the data. However, this special IGP-X00
customization gives you the option of adding a space character at the end of
the bar code instead.
•
Leading Zero
(factory default). A leading zero is inserted in front of the
data.
•
Trailing Space
. A space is inserted at the end of the data instead of a
leading zero.
•
X2 DPD
. When selected, I-2/5 bar code with a magnification X2 will use
the specially configured ratios 3:3:6:5 rather than 3:6:9:12 for
compatibility issues.
•
Modulo 7 CD
. The I-2/5 bar code uses a modulo 7 check digit instead of
the default modulo 10 check digit.
C39 Compatbl.
This menu makes the old method of decoding C39 alternative character set
compatible with the new method. For example in the old method for barcode
data, %K123%M, the barcode scans as [123]. The new method scans the
barcode as %K123%M.
•
Disable
(factory default). Uses the current way of decoding.
•
Enable
. Matches the old method of decoding.
