INTERFACES Submenus
137
•
Idle Response
.
This option is for the Series1 protocol.
•
Disable
(factory default).
•
Enable
. The printer sends a response character every two seconds
while the number of valid bytes in the buffer is less than 75 percent of
the buffer size.
•
One Char Enquiry
.
The One Char Enquiry mode uses the Poll Character
to detect a request from the host and sends a response back to the host.
This option also allows you to turn on and off this feature.
The Poll Character is removed from the data stream. If the Data Protocol
is set to ETX/ACK, ACK/NAK, or Series1, One Char Enquiry is
automatically disabled.
The options are Disable (factory default) and Enable.
Table 11. One Char Enquiry Response Characters
Printer State
Response (hex)
Online and Buffer Not Full
22
Online and Buffer Full
23
Offline and Buffer Not Full
20
Offline and Buffer Full
21
