82
4
MEDIA SETUP Menu
Print Direction and Orientation are two independent options that can be
combined to produce the following results depending on the Active IGP
Emulation:
The factory default is Head First when PGL is enabled.
The factory default is Foot First when ZGL is enabled.
Label Wait Time
When Media Handling is set to Tear-Off Strip or when Media Handling is set
to Continuous and Continuous Mode is set to Tear Strip Full, Label Wait Time
specifies the number of seconds after the buffer is empty that the printer will
wait before it advances media to the tear bar position.
When Media Handling is set to Peel-Off, Label Wait Time specifies the
number of seconds the printer will wait after a label is removed from the peel
bar before starting to print the next label.
The range is 0.1 to 60.0 seconds, and the factory default is 0.1 second.
Table 9. Results of Using the Head First Print Direction with Different
Orientation Options
Print Direction
Option
Orientation Option
Result in Active IGP Emulations
(PGL)
Head First
Portrait
Portrait
Head First
Landscape
Landscape
Head First
Inv. Portrait
Inv. Portrait
Head First
Inv. Landscape
Inv. Landscape
Table 10. Results of Using the Foot First Print Direction with Different
Orientation Options
Print Direction
Option
Orientation Option
Result in Active ZGL Emulation
Foot First
Portrait
Portrait
Foot First
Landscape
Inv. Landscape
Foot First
Inv. Portrait
Inv. Portrait
Foot First
Inv. Landscape
Landscape