104
4
EMULATION MENU
Power on IGP/PGL
You can set the IGP/PGL feature so that it is enabled or disabled when the
printer is powered on.
•
Enable
(factory default). IPG/PGL is enabled when the printer is powered
on. (The PGL feature is initialized in Normal mode).
•
Disable
. PGL is disabled when the printer is powered on. (The PGL
feature is initialized in Quiet mode).
Ext Execute Copy
•
Disable
(factory default). Dynamic data, overlay data, etc. are not allowed
if the optional Form Count parameter (number of forms to print) is
specified as part of the Execute command. (This setting is IGP-100
compatible.)
•
Enable
. Dynamic data, overlay data, etc. are allowed within a form where
the Form Count parameter is specified in the Execute command. In this
case, the same form is printed for whatever the Form Count is.
Incremental data is not incremented since the printing page is the same.
The overlay data is only printed with the first form and not on subsequent
forms, and each form is printed on a separate page.
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
•
Disable
(factory default). The printable data field is printed with the AI
enclosed in parentheses. This is the standard EAN/UCC-128 format.
•
Enable
. The printable data field is printed with the UCC fields separated
by spaces. This option is IGP-X00 compatible.
Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate set
of control function characters. See the description of the Code 128 barcodes
in the
PGL Programmer's Reference Manual
for details.
The range is 0 to 255, and the default is 14.
Ignore Mode
This parameter instructs the IGP to ignore the character selected under the
Select Character menu.
•
Disable
(factory default). The IGP does not ignore any characters.
•
Enable
. The IGP ignores the character specified in the Select Character
menu.
