Quick Reference Guide PP 3034
1
1 Unpack and installation the Printer
The printer PP 3034 is delivered in a package with the following label.
Note:
Before unpacking the PP 3034 should be checked whether the specified mains voltage
corresponds to the local power supply. Otherwise, contact the supplier.
1.1 Delivery check for completeness
Please check the items from the following list to be exhaustive. If parts are missing or
damaged, notify your supplier.
The package includes:
– the PP 3034 (2)
– a power cord (3)
– a tear off bar (4)
– the Quick Reference Guide (5)
– an Image Cartridge (6)
Unpack the PP 3034
– remove the foam (1)
– remove the box incl.
position (3), (4) and (5)
– remove the Image Cartridge
After removing the plastic foil lift the printer (2) with
two
persons
using the transport grips (7) on the left and
right side of the printer (2) and put it onto a table.
1.2 Removing the transport locks
First remove the security
strip (8).
– push the latch (9) in direction of arrow and open the top cover.
– at the bottom left of the printer is an additional protective strip (10). Remove the strip
carefully.
