1
Issue 01.2021
MPK Metall- und
Plastikverarbeitung GmbH & Co. KG
Friedrich-Ebert-Str. 298-300
D-58566 Kierspe
mpk-kierspe.de
Rooflight with pleated blind and net
for installation in caravans and mobile homes
VisionStar L pro
LED
Technical data:
EN
Installation and Operating Instructions
Please read the instructions carefully before installing the rooflight
and store
it for future.
We cannot be held responsible for incorrect fitting, handling or operation.
Any product faults relating to the production and materials used should be notified to us via
an authorised dealer immediately.
Included with delivery
1x Rooflight with outer frame
1x Inner frame with LED, polyswitch fuse, connection cable
1x Fixing parts (14 St. fixing brackets, 4 St. large plastic screw)
Additionally required for installation (not included in delivery)
1x Elastic sealant adhesive, e.g. Dekalin Dekaseal 8936 or SikaLastomer®-710
14x Fixing screws for the upper frame
Pan 3,5 mm / head according to DIN ISO 7049 (DIN 7981) / The length of the screw should
be determined by the roof thickness, plus approximately 10 mm for the screw to enter the
upper frame.
With timber support under the roof lining:
4x Fixing screws for the inner frame:
Pan 3,5 mm / head according to DIN ISO 7049 (DIN 7981) / length max. 10 mm
Explanation of symbols
Safety and installation instructions
Check the roof thickness of your vehicle before mounting.
The rooflight should only be fitted to a flat roof surface, both internally and
externally.
Choose a fitting position that will not interfere with other roof mounted components
(e.g. roof-racks/antenna's etc.) and avoid internally installed electrical cables and
furniture, which could impede the correct operation of the rooflight.
Inner frame
Make sure that there is a suitable supply line and switch for the lighting in the vehicle.
We recommend installation with the hinge side in the direction of travel. In the
caravan, the rooflight can alternatively be fitted with hinges to the right/left side of the
vehicle, provided the rooflight is not fitted to the front edge of the vehicle roof.
Never stand on the dome of the rooflight!
Do not open the rooflight while driving. The rooflight must be locked down before
traveling.
Do not open the rooflight in strong wind or rain.
Close the rooflight during rain and snowfall.
Aperture
700 x 500 mm
Roof thickness
25 bis 60 mm
Corner radius
23 mm
Site dome
815 x 583 mm
Height over roof 105 mm
Ventilation
0 bis 150 cm²
Weight
8,4 kg
Size inner frame
872 x 610 x 37 mm
Outer frame material
Polypropylene
Dome material
Polycarbonate
Speed limit:
inst. transverse
160 km/h
inst. lenghtways
130 km/h
Authorization
ECE R43 -019651
LED-light
575 x 9 x 2,5 mm
Light color ~ 3000 K (warm white)
Energy efficiency class
A+
Nom. useful liminous flux
2 x 500 lm
Voltage
12 -14V DC
Condumption
2 x 5,6 kW/h / 1000h
Nominal lifetime
10.000h
No. of switching cycles
50.000
Warm up time
<1sek.
Nominal beam angle
60°
NOTE
Particulary important information.
ATTENTION!
Failure to observe can lead to material damage.
WARNING!
Safety note: Serious risk of injury.
