MPM MNP-04, User Manual

12

GB

HOW TO USE THE HUMIDIFIER

1. 

Once the tank is filled with water, place it on the humidifier base. Attach the handle (9) and 
outlet lid (10).

2. 

Turn the nozzle ring in the lid (10) in the desired direction.

3. 

Plug the humidifier to the mains and POWER it ON (2a). The humidifying process will start 
and the LED display (2e) will interchangeably show ambient temperature (TEMP) and relative 
humidity (HUMID).

ATTENTION! The humidifier is designed to operate at ambient temperatures of 5 to 40°C.

4. 

Set a suitable humidifying intensity level using the MIST button (2b). There are three humid-
ifying intensity levels: 1 – low, 2 – medium, 3 – high. The currently set level is displayed in the 
bottom section of the LED display (2e).

ATTENTION! The sound of dripping water is normal during operation and does not indicate a malfunction. 

ATTENTION! If the outer surface of the humidifier becomes covered with condensed water during operation, 
power off the device immediately, disconnect it from the mains and wipe it dry.

5. 

You can use the TIMER (2c) to set the device to automatically power off after a specified 
amount of time. Press the button repeatedly to select a power-off time: 1, 2, 4 or 8 h. Pressing 
the timer button (2c) for the fifth time will deactivate the function and the text ‘TIME’ on the 
LED display will disappear.

6. 

The device can automatically adjust the humidity level in the room, but only upwards (the 
device cannot decrease the humidity level) from 45 to 80% (every 5%) of relative humidity. To 
activate this function, use the CONSTANT HUMIDITY/SLEEP MODE button (2d) After setting a 
humidity level, the indicator on the LED display will return to showing the current humidity 
value. To deactivate the humidity level control function, restart the humidifier.

ATTENTION! Due to a number of parameters (temperature, pressure and air flow), the indicated humidity level 
may differ from the actual humidity.

7. 

Press and hold the CONSTANT HUMIDITY/SLEEP MODE button (2d) for 3 seconds to deacti-
vate the LED display; the humidifier will continue to operate (SLEEP mode). Press and hold the 
button for another 3 seconds to turn the LED display back on.

8. 

You can operate the device using the remote control (13). Controlling the humidifier using 
the remote control is the same as using the buttons on the device, but separate buttons are 
used for the humidity level control functions and the sleep mode.

9. 

Constantly monitor the water level in the water tank (6) to prevent an unexpected stop of 
humidifier operation. Low water tank level is signalled with a red icon showing a crossed out 
water drop on the LED display. Maximum water consumption is approx. 300 ml/h.

10. 

To add a pleasant scent to the mist (aromatherapy), add up to 3-4 drops of an essential oil to 
the reservoir (4). While adding the oil, the humidifier must be powered off and disconnected 
from the mains.

ATTENTION! Do not pour the oil directly into the water. This may cause damage to the humidifier.

11. 

If you want to turn off the device, POWER it OFF (2a) and unplug it from the mains.