13
GB
BEFORE FIRST USE
After opening and unwrapping attachments and accessories, wash them in warm water. Do
not submerge the device itself in water - it should be only cleaned with a damp piece of cloth.
Please read the user manual below.
DOUGH MIXING
To use this function you should place the food processor container “B1” on the unit “A” - it
should be placed on the “A1” drive roller with handle turned towards the user and turned
counter-clockwise until it locks into position. After securing the container, insert the “F1”
dough hook in the container, then proceed to place food products to be processed into the
container and cover it with the “B2” cover, turning it counter-clockwise, until it locks into posi-
tion. The device is now ready to use. Add the remaining products through the opening in the
food processor cover. If needed, push the products using “B3” tappet. Tappet can also be used
as measure for powdery and liquid ingredients.
CAUTION! When working the dough, do not allow it to roll into a ball, as it may damage the device. Recom-
mended speed: during initial mixing use the “A3” switch position and switch to “A4” or “A5” after few seconds,
depending on the type of dough.
SLICING
This function also uses the food processor container “B1”. Follow the same assembly steps as
above, but use the “F2” steel knife instead of dough hook. This attachment allows you to cut
meat and vegetables.
Recommended speed: use the “A5” and “A7” - PULSE positions during slicing. Products placed
in the container when the device is working should only be pushed using the food processor
tappet “B3”.
MIXING
Disconnect the “A8” blender container cap from the main unit “A” by turning it clockwise and
replace it with the “G3” blender container, then turn it counter-clockwise, to lock it into po-
sition. Place the desired ingredients in the blender container. Blender cover cap “G1” can be
used as measure for ingredients.
CAUTION! Do not pour hot liquids into the blender container. Do not pour more than 1,5 l of liquids into the
blender container. In order to use the blender, food processor cover “B2” has to be properly placed on the food
processor container “B1”. Recommended speed: the RPM should be adjusted according to the recipe or individ-
ual preferences.
