MPMan EB9, User Manual

5

6

EN

EN

GENERAL WARNING

BEFORE YOU RIDE

ABOUT THIS MANUAL

It is important for you to understand your new bicycle. By reading this manual before you go out on your first ride, 
you’ll know how to get better performance, comfort, and enjoyment from  your new bicycle.

It is also important that your first ride on your new bicycle is taken in a controlled environment , 
away from cars, obstacles, and other cyclists.

Bicycling can be a hazardous activity even under the best of circumstances. Proper maintenance of your bicycle is 
your responsibility as it helps reduce the risk of injury. This manual contains many “Warning ” and “Caution” 
concerning the consequences of failure to maintain or inspect your bicycle. Many of the warnings and cautions 
say “you may lose control and fall”. Because any fall can result in serious injury or even death, we do not repeat 
the warning of possible injury or death wherever the risk of falling is mentioned.

Warning: this product might be limited to use on private road(check the regulations in force in the territory of use). 
We recommend using suitable protective equipment.

A SPECIAL NOTE FOR PARENTS

It is a tragic fact that most bicycle accidents involve children. As a parent or guardian, you bear the responsibility for 
the activities and safety of your minor child. Among these responsibilities are to make sure that the bicycle which 
your child is riding is properly fitted to the child; that is in good repair and safe operating condition; that you and your 
child have learned, understand and obey not only the applicable local motor vehicle, bicycle, and traffic laws, 
but also the common sense rules of safe and responsible bicycling. As a parent, you should read this manual 
before letting your child ride the bicycle. Please make sure that your child always wears an ANSI,ASTM,SNELL 
approved bicycle helmet when riding.

Your new bicycle was partially assembled in the factory and then partially disassembled for shipping. You may 
have purchased the bicycle already fully assembled and ready to ride OR in the shipping carton in the partially 
disassembled form. The following instructions will enable you to prepare your bicycle for years of enjoyable 
cycling. For more details on inspection, lubrication, maintenance and adjustment of any area please refer to 
the relevant sections in this manual. If you have questions about your ability to properly assemble this unit, 
please consult a qualified bicycle service specialist before riding. If you need replacement parts or have 
questions pertaining to assembly of your bicycle, call the service line direct at:

Typical Tools Required:

-Phillips head screw driver
-2.5mm,3mm,4mm,5mm,6mm & 8mm Allen keys
-Adjustable wrench or a 8mm, 9mm,10mm,13mm,14,,
 15mm & 17mm open/box end wrenches
-A pair of pliers with cable cutting ability

(Note: those tools are not included in the box, users 
need to prepare them themselves.)