Hard Disk Multimedia Player QH100
- 9 -
7. Press the lateral buttons at the same time and slide the hard disk bracket out
8. Fit the bracket with the hard disk well
9.
Connect SATA cable and power cable.
10.Set right the two plastic strips to protect hard disk drive from moving.
11.Slide the hard disk bracket in and make sure the buttons fit the holes well.
12. ok
●
●
●
Network-based Data Sharing with a PC
●
●
●
1.
LAN Cable connection between PLAYER and a PC
1.1 Connection to a PC
You can use any cable for the connection (either a direct or cross cable can be used)
Tip: If you have a previous LAN card connected to Internet, you may add
additional LAN card to connect PLAYER to the PC.
1.2 Connection using a HUB (or Internet Router)
For the connection to a hub or internet router, use a direct cable, Connect the LAN