11
12
8.2 Parameter setting list
Function
Setting range
Default
Battery Type
SLD /GEL/
FLD
/LI/USE/USE LI
SLD
Equalizing charging voltage
①
9V~17V
Available for USE only
9V~17V
Available for USE and USE LI only
9V~17V
Available for USE only
Boost charging reconnect voltage
①
9V~17V
9V~17V
Available for USE and USE LI only
Available for USE and USE LI only
Available for USE and USE LI only
System voltage
12/24/AUTO
AUTO
Charging current
0-rated current (0: no charging)
Rated current
Full-charging setting
0-10 A, 0: turn the function off 0
0
on:
constant voltage output in no
load on
the battery terminal
oF:
no output in no load on the battery
5-11V
oF
5V
Light control delay
60-3,600s
60s
Load mode
0-17
15
Load short-circuit protection
on:
open load short-circuit protection
oF:
close load short-circuit protection
on
Over-discharge delay
1-60s
5s
Temperature unit
°C: Celsius/°F: Fahrenheit
℃
RS485 communication baud rate
1200~115200kps
9600kps
Device address
1-247
1
System restart
F01
Function key
Factory data reset
F02
Function key
Clear historical data
F03
Function key
Note:
①
: 24V battery system, automatically multiply by 2 according to the set value to get the actual control value.
Boost charging voltage
①
Float charge voltage
①
Light control voltage
①
8.3 Type of battery
Please refer to "8.1 and 8.2" for setting.
8.4 Equalizing charging\boost charging\floating charging\charging reconnect
voltage\over-discharge reconnect voltage\over-discharge voltage
The option can only be set when the battery type is "USE" or "USE LI".
8.5 System voltage
When the system voltage changes, the system voltage icon on the main page will flash, prompting
the user to reboot for effective operation.
8.6 Charging current
1) [No charging]: Set 0
2) [Limit charging current] Set an arbitrary value from 1 to rated charging current in steps of 1A.
Boost charging
Floating charging
Over-discharge voltage
Over-discharge reconnect voltage
Charging reconnect voltage
Full-charging setting
9V~17V
Over-discharge restoring voltage
①
Over-discharge voltage
①
Equalizing charging
terminal
