DCA-180SSJU — OPERATION AND PARTS MANUAL — REV. #3 (02/01/10) — PAGE 63
1
use an pneumatic air
gun to tighten wheel lug nuts.
Figure 63. Wheel Lug Nuts
Tightening Sequence
MAINTENANCE (TRAILER)
NOTE
Lug Nut Torque Requirements
It is extremely important to apply and maintain proper wheel
mounting torque on the trailer. Be sure to use only the
fasteners matched to the cone angle of the wheel. Proper
procedure for attachment of the wheels is as follows:
1. Start all wheel lug nuts by hand.
2. Torque all lug nuts in sequence (see Figure 63).
DO
NOT
torque the wheel lug nuts all the way down. Tighten
each lug nut in 3 separate passes as defined by Table
16.
3. After first road use, retorque all lug nuts in sequence.
Check all wheel lug nuts periodically.
Table 16. Tire Torque Requirements
Wheel Size
First Pass
FT-LBS
Second Pass
FT-LBS
Third Pass
FT-LBS
12"
20-25
35-40
50-65
13"
20-25
35-40
50-65
14"
20-25
50-60
90-120
15"
20-25
50-60
90-120
16"
20-25
50-60
90-120
Summary of Contents for DCA180SSJU WHISPERWATT SERIES
