Page 3
6
Protect the Hose.
Do not drop heavy objects on the Hose. Avoid kinks in the Hose. Maintain proper clearance to avoid damage to
the Hose and Couplers.
7
Inspect repair before using vehicle
. Repairs to structural or frame members must be inspected by a qualified technician to
ensure that the structure is still strong enough to safely fulfill its function.
Service
1.
Tool service must be performed only by qualified repair personnel.
2.
When servicing a tool, use only identical replacement parts. Use only authorized parts.
3.
Use only the lubricants supplied with the tool or specified by the manufacturer.
Specific Safety Rules
1.
Keep hands away from Arbor Plates and Press Pin during use.
2.
Do not move workpiece while compressed.
3.
Release load before service or maintenance.
4.
Bolt to floor before use.
5.
Keep area under Arbor Plates clear. If Arbor Plates rest on obstruction (i.e. bolt, debris, etc.), it creates an uneven press , causing
excess stress and possible breakage.
6.
Avoid off-center loads. Do not operate if workpiece tilts or binds during compression.
7.
STOP and release compression if you suspect imminent structural failure, if safe, inspect thoroughly and reposition before proceeding.
8.
Do not compress springs or other elastic objects. They could disengage hazardously.
9.
Wear safety goggles, heavy-duty work gloves, and steel-toe work boots during set up and/or use.
10. Keep bystanders out of work area.
11. Do not stand directly in front of the press when loaded. Do not leave the press unattended when loaded.
12. Do not operate the hydraulic ram beyond rated capacity.
13. Inspect before every use; do not use if parts are loose or damaged.
14. Ram service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could
result in a risk of injury.
15. When servicing a Ram, use only identical replacement parts - refer to attached, product-specific parts list and diagram. Follow
instructions in the "User -
Maintenance Instructions" section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create
a risk of injury.
16. Only use with accessories rated to handle the forces exerted by this tool during operation. Other accessories not designed for the
forces generated may break and forcefully launch pieces.
17. Use only with Ram included with this Press.
18. Industrial applications must follow OSHA requirements.
19. This product is not a toy. Keep it out of reach of children.
20. Maintain labels and nameplates on the Shop Press. These carry important safety in formation. If unreadable or missing, con tact
service center for a replacement.
21. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and sit uations
that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator
Summary of Contents for 8998049
Page 8: ...Page 8 DIAGRAM ...
Page 18: ...Page 8 Diagramme ...