Mr. Coffee BMR 200, Instruction Manual

BEFORE YOUR  FIRST USE

Carefully unpack the breadmaker

 and remove all packaging materials.  To remove

any dust that  may have accumulated during packaging, wipe the inner pot, kneader

blade and the outside  of the breadmaker with a clean, damp  cloth.  Do not use

harsh or abrasive  cleaners on

  any part of the breadmaker.

Warning: Do not immerse the cord, plug, inner pot or base in water or other

liquid.

Place   the  breadmaker on a dry, stable   surface  away from  burners  and  away ‘from
areas where cooking  grease  or water may  splatter onto it. 

Plug  the breadmaker info a 120  volt 60 Hz AC only   outlet.

IMPORTANT SAFETY TIPS FROM MR. COFFEE”’

l 

Keep the breadmaker out o f the  reach of infants and children,  especially while it

is hot if any pads are accidentally  touched,  t h e  operation  may stop.

l 

Be  careful  to keep your lace and hands away from the breadmaker.

l 

Place  the breadmaker

 at least  2 inches away from  any  wall   for proper  cooling.

l 

Do not cover  the breadmaker

 with towels or any other  material because  steam

would not be able 

 to

 escape. This could  cause the lid 

to

 warp or change color.

l 

Do not  remove the inner pot  or insert your hand into the  inner pot   during

operation.   If you need to remove the inner pot  before operation  is complete,

 first

press The STOP pad 

to 

 stop operation of  the  breadmaker.

l 

Remove any flour, bread crumbs or other materials from the  inside of the inner

case using a damp  sponge  or  cloth.

 Do not  put a  larger quantity  of  ingredients into      

the  inner pot  than  recommended.

If you do so, the bread  may not mix or bake correctly and the breadmaker may
be damaged. The maximum amount  of flour to  be used  for the BAKE  settings is

4 -  2 / 3 cups. The maximum amount  of prepackaged breadmaker

 mix is 4 cups  t he

maximum amount  for the DOUGH  setting  is 4 1 / 2 cups flour.

l 

Handle the inner pot whith care. Remove the inner pot  by pulling  straight  up on

the handle. Do-not turn  or shake the inner pot  while taking it out. If the  inner

p o t  is damaged or bent, the temperature  sensor won't  work properly. Handle hot

inner pot using pot holders  or oven mitts.

l 

Do not use metal scouring pads on any part or  parts of the breadmaker as this will

damage the finishes.