Mr. Fill
Pascalweg 16
4104 BG Culemborg
The Netherlands
INSTRUCTION MANUAL
Ultra Fill
15
1. Open the door.
2. Remove the main fuse.
3. Move the roll container outside.
4. Unscrew the caps. This can be done by
hand and an Allen key.
5. Tighten the lifting eyes with lifting ropes.
6. 6.Raise the waste container.
Figure 5 - Attachment points on Mr. Fill
4.4
Transport attachments
If the product is transported over a longer distance,
the supplied transport brackets must be used. As
shown on the right, the product must be positioned
in a vertically, after which the transport brackets can
be mounted on the pallet. The product must be
place on a pallet by at least two people.
Moving the product without a pallet may only be
carried out with a hand truck, which is suitable for
transporting at least 200 kilos. When using a hand
truck, it is recommended that the product be
securely fastened using the correct tightening
straps. This prevents the product from falling from
the hand truck. The product must be placed on a
hand truck by at least two people.
Figure 6 - The transport brackets