Mr. Fill
Pascalweg 16
4104 BG Culemborg
The Netherlands
INSTRUCTION MANUAL
Ultra Fill
8
1.4
The product
The product is a self-compressing waste
container. The insert flap opens by pressing the
foot pedal or pulling the handle. After the waste
has been deposited and the insert flap closes, the
waste falls into a roll container.
As soon as the level sensor detects the waste at
the top of the roll container or if the insert flap has
been opened 10x, the flap is automatically locked
and the waste will be compressed.
If the waste cannot be further compressed, a
notification-full is generated. This can be read on
the internet platform and on the waste container
itself. The required power is generated by a solar
panel and stored in a battery.
Figure 1 - Image of the product
1.5
Types
This user manual applies to the Ultra Fill 120L and
the Ultra Fill 240L. The functionality and operation
is identical for both types. The difference between
the Ultra Fill 120L and the Ultra Fill 240L are the
dimensions of the product and the capacity of the
internal roll container. See section 1.3 for the
capacities of the Ultra Fill 120L and Ultra Fill 240L.
The correct type designation can be found on the
type plate. This is located at the bottom right on
the side of the container. It lists the model number,
serial number and production period.
Figure 2 - Location of the type plate
1.6
If the product has been used, returns are no longer possible.
In order to use the Ultra Fill properly, the area must be safe and clean.
•
Keep a clean tidy floor around the product to prevent tripping over/slipping;
•
Provide a free space around the product of at least 50 cm;
•
Always follow the safety instructions;
