Mr. GARDENER 05111, Translation Of The Original Instructions

36

ENGLISH

Specified Conditions Of Use

The mower has been designed for cutting grass and 

grass areas with a maximum climb of 20° in private 

gardens around the house and in garden colonies.
Do not use this product in any other way as stated 

for normal use. Not observing general regulations 

in force and instructions from this manual does not 

make the manufacturer liable for damages.

Use the appliance only outside, never use it 

in confined and bad ventilated areas.

The mower must not be used for cutting 

bushes, hedges and thickets, for cutting and 

mulching creepers or lawns on roofs or in 

balcony boxes. The mower must also not be 

used as a crusher for mulching tree cuttings and 

hedges or levelling any terrain roughness.  

Requirements for operating staff 

The operating staff must carefully read the Opera-

ting Instructions before using the appliance..
This device is not intended for use by persons (inclu-

ding children) with limited physical, sensory or mental 

capabilities or without the necessary lack experience 

or knowledge unless they are supervised by a person 

Technical Data

Petrol Lawnmower ............................................................................................................................TRIKE 515D

Art. No ...................................................................................................................................................................................................05111

 Contents .............................................................................................................................................................................. 159 ccm

   Motor output 

OHV 4-stroke motor ............................................................................................................................................2,6 kW (3,5 PS) 

  Rated revolutions .........................................................................................................................................................2950 min

-1

Travel speed ................................................................................................................................................................ca. 3,6 km/h

  Cutting width ......................................................................................................................................................................508 mm

  Collection bag capacity ...........................................................................................................................................................65 l

 Fuel ........................................................................................... SUPER/SUPER PLUS/SUPER E10/NORMAL/NORMAL E10  

     Weight ........................................................................................................................................................................................34 kg

Dimensions ............................................................................................................................................................1660 x 565 x 970 mm

Noise and Vibration Information 

 Sound pressure level L

pA

1)

 ..........................................................................................................................................83,7 dB (A)

Sound power level L

WA

1)

 ...........................................................................................................................................93,05 dB (A)

Wear ear protectors!

Vibration emission value a

h

2)

 .....................................................................................................................................................6,9 m/s

2

1)

 Uncertainty K=3 dB (A), 

2)

 Uncertainty K=1,5 m/s

2

Warning 

The vibration emission level will vary because of the ways in which a power tool can be used and may 

increase above the level given in this information sheet.  The vibration emission level may be used to compare 

one tool with another. It may be used for a preliminary assessment of exposure. An accurate estimate of the 

vibratory load should also take into account the times when the tool is shut down or when it is running but not 

actually in use. This may significantly reduce the vibratory load over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the 

tool and the accessories, keep the hands warm, organisation of work patterns.

Read and understand the 

operating instructions before using 

the appliance.  Familiarise with the 

control elements and how to use the appliance 

properly.Abide by all the safety measures stated in 

the service manual. Act responsibly toward third 

parties. The operator is responsible for accidents or 

risks to third parties. In case of any doubts about 

connection and operation refer please to our 

customer center

delivered items

1

Mulching wedge

2

Side ejection

3

Collection bag

4

Spark plug wrench

5

Bowden clamps

6

Wheels/screens including star screw/U-washer

7

Screws

8

height adjustable nose wheel

EN