Mr. Heater MH40PH, Instructions And Parts List

ASSEMBLY INSTRUCTIONS. 
Removing Heater from Package: 

1.  Remove heater, reflector from carton. 
2.  Remove all shipping packaging from heater 

components. 

3.  Retain all packaging material and carton, until 

heater warranty has expired.  Any warranty returns 
require original packaging and carton. 

4.  Check heater for any shipping damage.  If any is 

found, immediately contact and return heater to 
dealer / distributor where purchased. 

Step 1:

 Remove all components from package and 

inspect parts. 
  
  

Packaging includes

: 

 
Nut & Bolt Pack Containing: 
4pcs--3/16”-24x3/8” screws 
12pcs--1/4”-20x3/4” bolts   12pcs--1/4”-20 nuts 
24pcs--1/4” flat washers 
12pcs--1/4” lock washers   
4pcs--Pan head screws 

4--Pan head Washers 

3pcs--1/4”-20x1/2” bolts 
3pcs--1/4”-20x1/2” bolts (stainless steel) 
3pcs--5/16”-18 round head nuts 
6pcs-5/16” flat washers 
 
Loose Items: 
1-Dome          1-Emitter 

1-Burner Assembly 
1-Post     1-Gas Line 
3-Legs   1-Post support 
1-Cylinder Cap 
1-Base    1-Chain 
1-Back Cylinder Cover 
1-Front Cylinder Cover 

\\Commserv\Users\EGI_Shared\Engineering\Labels & Manuals WIP\MH40PH\MH40PH Manual.doc 

Page 4 of 11 

06/08 Rev A