background image

IV-12 VFD Clock Jenny

IV-12 VFD Clock Jenny

   Display Mode

This is the standard display mode.

The clock shows the actual time and fades the date display

or scrolls the digits for time to time as customized in the

option menu

 stated at page 6.

   Button MODE

Briefly pushing button MODE rotates the display showing

time – alarm – date.

No keypress for several seconds returns to the time display.

Longer pushing button MODE enters the 

option mode

.

   Button SET

Briefly pushing button SET toggles the alarm.

The red LED behind this button switch indicates the

activation of alarm.

Longer pushing button SET enters the 

setup mode

.

   Button ADJUST

Pushing button ADJUST quickly fades for around four

seconds to the date display.

   Button LED

Pushing this button activates the RGB controller for the

tube’s lighting. Detailed informations are found on the

last page of this manual.

The value is automatically stored in the EEPROM and

is recalled even in the event of a total power loss.

Tips for fine adjusting the accuracy.

Set the time to an accurate reference clock, eg. a DCF or GPS controlled

radio clock. Then check regularly how many full (!) seconds your clock runs

fast or slow within a specific timespan.

The following formula calculates the necessary correction value:

(550 / timespan in hours) * deviation in seconds within this timespan

Example: Your clock lost 2 seconds within 72 hours. With the formula you’ll

get a correction value of around 15 the clock needs to speed up. Add this

value now to the saved (!) value.

Set „170“ as start value for the beginning of the adjusting sequence.

Option 11

Alarm tone sound

11

11

11

11

11

01

01

01

01

01

fast bleep (Std.)

11

11

11

11

11

09

09

09

09

09

slow bleep

11

11

11

11

11

10

10

10

10

10

no function

Option 12

Dimmed brightness

12

12

12

12

12

00

00

00

00

00

Display is turned off

12

12

12

12

12

10

10

10

10

10

maximum brightness (Std.: 

04

04

04

04

04

)

Option 13

Start time of dimmed brightness

Set hour of time to start dimming.

13

13

13

13

13

00

00

00

00

00

Start at midnight (Std.)

13

13

13

13

13

23

23

23

23

23

Start at 23.00 (11.00 PM)

Option 14

Timed dim duration 

in hours

14

14

14

14

14

00

00

00

00

00

Dimming disabled (Std.)

14

14

14

14

14

23

23

23

23

23

23 hours (maximum)

14

14

14

14

14

24

24

24

24

24

Dimming always enabled

4

9

Reviews: