TURNING THE TRACKER ON/OFF
Turning ON: Press the power button (1) for 5 seconds.
Turning OFF: Press the power button (1) for 10 seconds. After 5 seconds, you will feel a vribration,
please keep pressing the button!
CHARGING THE BATTERY
IIn standby mode, the battery of the Mr Safe Smart Pet tracker lasts up to 7 days.
Put the USB plug of the supplied charging cable in a 5V USB power source. Align the magnetic
charger with the metal charging contacts (3) at the backside of the tracker.
Important!
Do not use any other charger than the charger supplied in the packaging.
SETTING UP THE SIM CARD
If a SIM card is inserted in a device, the device knows the provider, telephone number, and
you can make and receive calls via the SIM card. Additional data are required for the use of
the internet. That is the APN data. These APN data are already pre-programmed for the most
important providers, such as Proximus, Base, Orange in Belgium. The APN data can be adjusted
by sending an SMS to the telephone number associated with the SIM card, while the SIM card is
placed in the pet tracker and the device is switched on. Here are some examples of SMS:
• Telenet: AT + ABH = sms_cmd, set_apn, 123456, telenetwap.be ,,, 20605 #
• Mobile Vikings: AT + ABH = sms_cmd, set_apn, 123456, web.be, web, web, 20630 #
• Jim Mobile: AT + ABH = sms_cmd, set_apn, 123456, web.be, web, web, 20630 #
After the SMS has been received correctly, the tracker sends an SMS back. Then you know that
the data has arrived. After a few minutes the tracker will make the battery status and other
settings visible in the App.
Do you not receive an SMS? Then the device may be switched off, or the PIN code on the SIM
card has not yet been switched off, or the device does not have a good reception from your
service provider.
