mr
.
steam
®
Controls
__________________________________________________________________
13
iSteam 2.0 App
The iSteam 2.0 App can be downloaded from the App
Store or Google Play.
BEFORE REMOTELY ACTIVATING THE
STEAMBATH CONFIRM THAT IT IS UNOCCUPIED.
Activating the steam in an occupied room may subject
persons to the hazards listed in this manual.
ONLY ACTIVATE THE STEAMBATH IF
THE STEAM ROOM DOOR IS CLOSED. Activating or
using the steambath with an open door may cause prop-
erty damage or injury to persons outside of the steam-
bath.
IMPORTANT NOTE
The iSteam 2.0 and App will update
each other based on changes inputted. There may be a
lag of a few seconds between making a change on one
device and it updating on the other.
Configuring the
iSteam 2.0
Set the passcode and turn on
the Wi-Fi from the iSteam 2.0
(see page 11). The default
passcode is 0000
IMPORTANT NOTE:
A Wi-Fi network is required to use the iSteam 2.0 App.
If you cannot connect to your iSteam 2.0 the Wi-Fi sig-
nal may be too weak. The wireless router can be moved
closer to the iSteam 2.0 control, or a wireless repeater
can be installed near the iSteam 2.0 control.
Open the iSteam 2.0 app and press CONFIGURE iSTEAM
WIRELESS. Ensure the SSID listed is the name of your
Wi-Fi network. If the SSID is different from your network,
or no SSID is listed, ensure Wi-Fi is enabled on your de-
vice. If your wireless network is password protected enter
the password in the location provided.
Press CONFIGURE NOW.
When iSteam 2.0 is properly configured, the app will re-
turn to the “Configure-Search-Demo” screen. If an error
occurs ensure the Wi-Fi has been enabled on iSteam 2.0,
you are in the proper wireless network, your password is
correct and the wireless signal at the iSteam 2.0 is strong.
IMPORTANT NOTE:
Only one smart device can control
iSteam 2.0 at a time. To use more devices the App must
be closed on all other device. To use iSteam 2.0 from
another device, simply press search for iSteam 2.0 after
the iSteam 2.0 has been configured. Configuring the
iSteam 2.0 only needs to be done once.
Search for iSteam
After configuring iSteam 2.0, press SEARCH OF iSTEAM
UNITS. Your iSteam 2.0 will be displayed as iSteam
XX XX. The 4 digit code will match the last 4 digits of
the MAC address displayed in the passcode screen on
iSteam 2.0 after Wi-Fi has been enabled. Press the
appropriate iSteam 2.0 you want to control
Passcode
Enter the passcode that was
set on the iSteam 2.0 when
the Wi-Fi was enabled in the
passcode screen, and press
ENTER
Start Screen
Press the START button
to turn the steam genera-
tor ON and to display the
Dashboard screen. Steam
will begin to flow a few min-
utes after the START button
is pressed and the warnings
are read. The time required
for the steam room to reach
steam bathing tempera-
ture depends on the steam
room construction and
steam generator specifications.
WARNING
!
CAUTION
!
