4 Product description
Maschinenfabrik Reinhausen GmbH 2020
51
6385142/08 EN
ETOS
®
ED
In these operating instructions, the path for navigating to a parameter is al-
ways shown in an abridged form: Go to
Settings > Parameters > System >
Time synchronization
.
Setting parameters
There are various ways to configure the settings, depending on the parame-
ter.
Selecting from a list
To select a list entry, proceed as follows:
1. Use the rotary knob to navigate to the list and press the
key.
Figure 32: Select an entry from a list
2. Use the rotary knob to highlight the list entry and press the
key.
3. Press the
Accept
button to save the modified parameter.