9 Visualization
Maschinenfabrik Reinhausen GmbH 2020
325
6385142/08 EN
ETOS
®
ED
To transfer the data, the following options are available:
Option
Description
USB
Data transfer via USB port on rear of CPU I assembly.
PC
Data transfer via PC using web-based visualization.
Table 98: Data transfer options
9.36.1 Exporting data
The device stops logging the measured value recorder data for the duration
of the export.
You can export the following data from the device, depending on your device
configuration:
Option
Description
System image
Complete image of the system (software and configuration). If you
are using the option "with history", all of the event memory entries
are also exported.
System config-
uration
System configuration
Customer pro-
gram
Customer program export (TPLE).
Event memory
All event memory entries.
Recorder
Measured value memory export.
Parameter list
Parameter list with descriptive text and values (min, max, current).
Event list
Complete list of all possible events.
SCADA config-
uration
Control system configuration (e.g. ICD file for IEC 61850).
Operating In-
structions
Operating instructions, protocol specifications.
Settings
Configuration of parameters and events.
Data point con-
figuration
Data point configuration of the control system.
Sensor bus de-
vice descrip-
tion
Sensor description of the sensors for MR sensor bus that have
been created with the sensor editor.
Service data
Device data for support through the Maschinenfabrik Reinhausen
GmbH Technical Service department
Security log
Logbook of all instances of access and changes relating to secu-
rity.
RADIUS dictio-
nary
Dictionary for importing on a RADIUS server.
Table 99: Exporting data
