4 Packaging, transport and storage
Maschinenfabrik Reinhausen GmbH 2016
15
4489615/01 EN
TAPMOTION® TD ISM®
Packaging, transport and storage
Packaging
The products are sometimes supplied with a sealed packaging and some-
times also dried depending on what is required.
A sealed packaging surrounds the packaged goods on all sides with plastic
foil. Products that have also been dried are identified by a yellow label on the
sealed packaging.
The information in the following sections should be applied as appropriate.
Suitability
NOTICE
Property damage due to incorrectly stacked crates!
Stacking the crates incorrectly can lead to damage to the packaged goods!
► Only stack up to 2 equally sized crates on top of one another.
The packaging is suitable for undamaged and fully functional means of
transportation in compliance with local transportation laws and regulations.
The packaged goods are packed in a stable crate. This crate ensures that
the packaged goods are secure when in the intended transportation position
and that none of the parts touch the loading surface of the means of trans-
port or touch the ground after unloading.
The packaged goods are stabilized inside the crate to prevent impermissible
changes in position.
A sealed packaging surrounds the packaged goods on all sides with plastic
foil. The packaged goods are protected from humidity using a desiccant. The
plastic foil is bonded after the drying agent is added.
Markings
The packaging bears a signature with instructions for safe transport and cor-
rect storage. The following symbols apply to the shipment of non-hazardous
goods. Adherence to these symbols is mandatory.
Protect
against
moisture
Top
Fragile
Attach lifting
gear here
Center of
mass
Table 7: Shipping pictograms
4
4.1
4.1.1
4.1.2
Summary of Contents for TAPMOTION TD ISM
Page 1: ...Motor drive Unit TAPMOTION TD ISM Operating Instructions 4489615 01 EN OEM Control Box ...
Page 26: ......
Page 27: ......
