6 Functions and settings
Maschinenfabrik Reinhausen GmbH 2016
185
5163667/00 EN
TRAFOGUARD® ISM®
NOTICE
Damage to the file system
Damage to the file system due to improper data transfer may result in the
device no longer functioning properly.
► Do not disconnect the device from the power supply during the import.
► During the import, do not remove the USB stick or disconnect the net-
work connection.
To import data, proceed as follows:
1.
Go to
Settings > Import
.
2.
Select the option you want for data transmission (PC or USB).
3.
Select the file to be imported.
ð
The file is checked.
4.
Press the
Import
button.
ð
The data is imported, then the device is restarted.
Linking signals and events
The device allows you to link digital inputs (GPI) and control system com-
mands (SCADA) with device functions, digital outputs (GPO), and control
system messages.
The digital inputs available are each permanently linked to a
Generic digital
input
event message and the control system commands available are each
permanently linked to a
Generic SCADA command
event message for this
purpose.
Input/command
Event message
Digital input 1
1)
Generic digital input 1
Digital input 2
1)
Generic digital input 2
...
...
Digital input 42
1)
Generic digital input 42
Generic SCADA command 1
Generic SCADA command 1
Generic SCADA command 2
Generic SCADA command 2
...
...
Generic SCADA command 10
Generic SCADA command 10
Table 44: Linking of digital inputs and control system commands with event messag-
es
1)
The number of available digital inputs depends on the order-specific device
configuration.
You can link the event messages with device functions, digital outputs, and
control system messages. You can also link all other event messages (e.g.
undervoltage U<
) with digital outputs and control system messages. Corre-
sponding parameters, for which you need to enter the relevant event num-
ber, are provided for this purpose.
6.27
Summary of Contents for TRAFOGUARD ISM
Page 1: ...Monitoring System TRAFOGUARD ISM Operating Instructions 5163667 00 EN ...
Page 222: ......
Page 223: ......
