6 Functions and settings
Maschinenfabrik Reinhausen GmbH 2016
186
5163667/00 EN
TRAFOGUARD® ISM®
Linking functions
You can link the
Generic digital input
or
Generic SCADA command
events
with device functions. This allows you to remotely control the device using
digital inputs or commands via the control system (SCADA). Depending on
your device configuration, the following parameters are available for this pur-
pose:
Parameter
Description
Master parallel operation method
If the assigned event is active, the
device activates the master parallel
operation method.
Follower parallel operation method
If the assigned event is active, the
device activates the follower paral-
lel operation method.
Automatic tap synchronization par-
allel operation method
If the assigned event is active, the
device activates the automatic tap
synchronization parallel operation
method.
Independent regulation
If the assigned event is active, the
device activates simplex mode.
Deactivate parallel operation
If the assigned event is active, the
device deactivates parallel opera-
tion.
Blocking
If the assigned event is active, au-
tomatic voltage regulation is
blocked.
Activate remote mode
If the assigned event is active, the
device activates remote mode.
High-speed return
If the assigned event is active, the
device activates high-speed return.
Target-tap-position operation
If the assigned event is active, the
device switches to the defined tar-
get tap position.
Activate desired value 1
If the assigned event is active, the
device activates desired value 1.
Activate desired value 2
If the assigned event is active, the
device activates desired value 2.
Activate desired value 3
If the assigned event is active, the
device activates desired value 3.
Activate desired value 4
If the assigned event is active, the
device activates desired value 4.
Activate desired value 5
If the assigned event is active, the
device activates desired value 5.
Increase desired value
If the assigned event is active, the
device prompts an increase in the
desired value.
6.27.1
Summary of Contents for TRAFOGUARD ISM
Page 1: ...Monitoring System TRAFOGUARD ISM Operating Instructions 5163667 00 EN ...
Page 222: ......
Page 223: ......