Recirculating cooler
(
Chiller
)
25
The adjusting time will be different due to different chillers and different
adjusting temperature. Normally it it about 15 to 20 minutes.
4.6 Switch off
4.6.1 Press Start/Stop button
to stop the compressor, the system log into
standby status.
4.6.2 Switch off the power of the control panel;
4.6.3 If extended outage, please turn off the electric leakage protection and
power switch, empty and dry the water reservoir and pump;
4.6.4 After long time usage, the pump should be opened to check and change the
worn-out parts when water flow and pressure decrease obviously;
4.6.5 Please ensure no water in the unit (especially in the pump and plate heat
ex-changer) when the environment temperature is under 0
℃
. Residual water will
freeze and do damage to parts such as the pump, heat ex-changer and pipes. It
is suggestive to use antifreeze as circulating medium for long time operation and
outage in low temperature environment.