8
4.4 Display window
Results screen
Memory clear screen
(1) (2)
(3)
(4)
(5) (6)(7) (8)
(9)
(10)
(11)
(1)
Shows unit for measurement data.
(2)
Shows
measurement
data in preset unit.
(3)
Shows sample name (a to z or space)
(4)
Normal display shows sample number.
Error number will appear in case of error.
(5)
Appears when Stability is set at Auto (automatic stability sense mode).
The measurement results are automatically held by the automatic sense.
(6)
Appears when Memory in is set at Auto (saving). When measurement data is held,
the results are automatically stored in the unit. When the data are saved, this
symbol blinks.
(7)
Appears when Memory out is set at Auto (output). When Printer or Personal
computer is connected, the data is automatically output on data being held. This
symbol blinks when data is being output.
(8)
The battery capacity level is shown.
(9)
Shows
measurement
temperature (Celsius /Fahrenheit)
(10)
Appears in data deletion mode on Memory clear.
(11)
The “*” mark appears when data is marked with [mem. clr/all] key.
This mark is useful for data control to identify unnecessary data of
measurement failure.
