28
9.5 Setting external output
9.5.1 Data output to a personal computer via infrared communication
The DA-130N can transmit data to a personal computer with an infrared optical communication feature.
For this purpose, install the data acquisition computer software (Mini Term). (It can be reached from our
website (
ZZZPUFODEFRP
). Click “PRODUCT,” then click “DA-130N
(Portable Model)” in the Density/Specific Gravity Meter section. The “Data communication Software
for Portable Analyze” (98-439-0062) can be downloaded from there.)
You need to refer to the instruction manual for your computer as well as this manual.
Follow the instructions below for the setup to connect DA-130N to PC:
(1)
Preinstall the IrDA driver of Microsoft if the OS of your PC is ‘Windows95’ with the infrared
feature.
When the preinstalled program is activated, the dialog box below will appear.
(2)
Make sure that the infrared port matches COM port on the option box screen of infrared monitor.
Select COM7 for Mini Term communication port.
(Set COM port No. and transmission rate at 9600
baud rate on ‘Mini term’. No other settings are
necessary.)
IrDA protocol: Data length 8 bit
Parity
none
Stop
bit
1
(These parameters are fixed.)
After you finish setting on this screen, activate Mini
Term for further setting.
