MRC DW-6160, Operation Manual

4. MEASURING PROCEDURE

4-1 ACV measurement procedure

1)Rotate the function switch to the " ACV " position and

Power ON the meter.

2)Connect Red test lead to the " V 

Ω

 " input terminal and

Black test lead to " COM " input terminal.

3)Use the test lead measurement unknown AC voltage.
4)Read the Display. The show value will correspond to the

position selected. If the Display shows " ---- ", it
indicates an out-of-range measurement.

4-2 DCV measurement procedure

1)Rotate the function switch to the " DCV " position and

Power ON the meter.

2)Connect Red test lead to the " V 

Ω

 " input terminal and

Black test lead to " COM " input terminal .

3)Use the test lead measurement unknown DC voltage.
4)Read the display . The show value will correspond to the

position selected.  If the Display shows " ---- " it
indicates an out-of-range measurement.

Remark :

* Observe polarity when measuring DC voltage.

4-3 Resistance measurement procedure

1)Rotate the function switch to the 

Ω

 position and Power

ON the meter.

2)Connect red test lead to the " V 

Ω

 " input terminal and

black test lead to " COM " input terminal .
Connect test lead to the resistance.

7