10
4.3 Measure Target Temperature
Point device to measurement target, and press HotKey button 1 to
auto-focus. On the upper-right LCD corner,
*=×× displays the spot
measurement result. For better accuracy, long press
button to
perform manual rectify.
Select Area (Rect) Measurement to measure max, min, and average
temperature within a rectangle box.
It is recommended to press
button to freeze thermal image first,
and then apply different and detailed analysis. Press
button one
more time to unfreeze.
When measure result is outside standard temperature range, screen
display changes to indicate either below or above temperature range.
E.g.: 175/395 is with -20 ~ 250
℃
℃
℃
℃
, then the Camera Will Display>
250.0
℃
℃
℃
℃
or <-20.0
℃
℃
℃
℃
to Prompt Users.
4.4 Infrared Image and Voice Annotation
Each thermal image can save up to 40 seconds voice annotation
data. Image and voice annotation can later be reviewed on PC by
bundled IRSee software. To save infrared image, press the Shutter
button while accessing the target image, then a “Voice” dialog box
appears, select “Cancel”, then press the Enter key, the image file
has been saved; select the “Record”, then press the Enter key, both
image and voice files have been saved.
In main menu, press the Enter key to File
Save provides the same
function.
: Select Cancel during voice recording to exit.
4.5 Infrared Image Playback
Press the Enter button to enter the main menu.
Select the Main Menu
→
File
→
Manage, and then select the file
directory and file name, the thumbnail image of the stored image is
displayed, then press the Enter button to enter the viewing state.
When viewing thermal image, press the Left (
) or Right (
) button
to switch thermal image in the same folder.
Summary of Contents for IR-CAM-B-70
