background image

PURE POWER DUAL

TRAIN CONTROLLER

FOR AC POWERED TRAINS AH601

CAUTION – ELECTRICALLY OPERATED PRODUCT

As with all electric products, precautions should be observed
during handling and use to reduce the risk of electric shock.

FOR YOUR PROTECTION

• Not recommended for children under 12 years of age.

• Turn off the power switch when it is not in use.

• Do not use or store in damp areas.

• Do not open the cabinet and try to repair it by yourself.

• Before returning your unit for repair or servicing, make certain

it is defective. Do not shut down your layout unnecessarily.

• Never operate a DC powered locomotive with your Pure Power

Dual. This may damage your locomotive motor.

FEATURES

• Pure smooth AC sine wave output assures compatibility with most AC

loco sound systems

• Dual throttle control to operate two trains on different tracks
• Horn/whistle, bell and direction buttons for each throttle
• Pilot light, master on-off switch
• Nostalgic retro design: rugged cabinetry with slide transformer for

smooth linear control

• Fixed 14 VAC output terminals for accessories
• Heavy-duty wire attachment lugs - no tools needed
• Voltage and current meters for each throttle to monitor layout conditions

ELECTRICAL SPECIFICATIONS

INPUT:

120 VAC, 60 Hz

OUTPUT:

0 to 21 VAC variable for track, 14 VAC for accessories
270 Watts sustained power output

It is recommended that you save your Pure Power Dual
power pack box and styrofoam inserts.

Summary of Contents for PURE POWER DUAL

Page 1: ...h your Pure Power Dual This may damage your locomotive motor FEATURES Pure smooth AC sine wave output assures compatibility with most AC loco sound systems Dual throttle control to operate two trains on different tracks Horn whistle bell and direction buttons for each throttle Pilot light master on off switch Nostalgic retro design rugged cabinetry with slide transformer for smooth linear control ...

Page 2: ...ed again the locomotive will travel in the opposite direction However the locomotive will reverse direction after the speed control is turned to 0 and the speed control advanced twice This button will not control locomotives that do not have an E unit or if the E unit is deactivated If you are going to operate the locomotive in one direction such as on a layout with automatic station stops or insu...

Page 3: ...ipped locomotives follow instructions that come with loco Analog meters have a plus or minus variance in their readings In some cases the meters may not register exactly the same readings WARNING Most sound equipped locomotives use a maximum operating voltage of approximately 20 VAC Some may require even higher while others require as low as 17 VAC The MRC Pure Power Dual puts out 21 VAC maximum W...

Page 4: ...electrically operated unit it is always best to periodically examine it and have repaired or replaced any potentially hazardous part SERVICE Your Pure Power Dual power pack has been thoroughly tested at the factory If for some reason your Pure Power Dual is properly connected and still not functioning correctly it may have to be returned for service Please telephone our service department at 732 2...

Reviews: