Caution – Electrically Operated Product
As with all electrical products, precautions should
be observed during handling and use to reduce
the risk of electric shock
WARNING: Children under the age of 14 must be
supervised by an adult when operating this product
As with any electrically operated unit,
it is best to periodically examine it and have any
potentially hazardous part repaired or replaced
___________________________________________
SPECIFICATIONS
INPUT: 120 VAC 60 Hz / 220 VAC 50 Hz
OUTPUT*: 0 to 15 VDC HO/N
0 to 18 VDC O/G
15/18 DC Fixed
TOTAL OUTPUT: 80VA
CONGRATULATIONS
You have just purchased one of the most advanced train controls
on the market today: The Throttlepack 9950. The Throttlepack
9950 offers precise slow speed control, voltage and current
readings, all in a high-grade advanced engineering resin
thermoplastic housing for durability and safety. We are confident
that you will enjoy using your new Throttlepack 9950 now, and for
many years to come.
THROTTLEPACK 9950
DC HIGH POWER TRAIN CONTROLLER
Item: 0001320
Model Rectifier Corporation
360 Main St. STE # 2
Matawan, NJ 07747 USA
Telephone 1-732-225-6360
www.modelrectifier.com
© 2019 Model Rectifier Corporation
Printed in USA
CONTROLS FOR DC OPERATION
Power Switch
The master on-off switch is the left side of the cabinet. OFF disconnects the
power going to your Throttlepack 9950 to completely shut down the unit. ON will
power the unit and LCD will light up indicating there is track power available.
There will be a slight delay in the LCD until the Throttlepack 9950 powers up or
powers down.
*Scale/Gauge Switch
On the bottom of the cabinet is a small micro-switch. Turn OFF the Throttlepack
9950 before toggling this switch. Slide this switch into the position to match the
output of the train controller for your layouts scale or gauge, (HO/N or O/G).
Sliding the switch towards the front of the cabinet will put the Throttlepack 9950
into the O/G mode. Placing the switch into the opposite direction sets the
Throttlepack 9950 to the HO/N scales.
Momentum Button
The momentum button allows you to toggle the momentum on/off. With the
momentum OFF a change in the throttle setting results in an immediate change
in the locomotive speed. With the momentum ON, the locomotive starts out more
slowly like a real locomotive. The LCD will display a light bulb icon when
momentum is on. This feature can substantially add to your model railroading
enjoyment. When a real locomotive is given an increase in throttle setting there is
a lag until the pre-set speed is reached. The heavier the load of the cars being
drawn, the longer the lag time.
Brake Button
The brake button on your Throttlepack 9950 is a momentary push button. Hold
down the brake button to operate the brake function. Your locomotive will slow at
a steady rate. To have a more gradual decrease in speed you need to activate
the Momentum by pressing the Momentum button and then use the Brake
button. After releasing the Brake button your locomotive speed will return
according to the setting on the Throttle Control.
Direction Button
The direction button reverses the polarity of voltage applied to the track and
reverses the direction of your locomotive. This button should only be operated
when the locomotive is not moving
(throttle control turned to STOP
) to prevent
damage to the locomotive mechanism. The LCD will display the direction you
have selected. Forward direction is indicated by an Up Arrow and reverse
direction is indicated by a Down Arrow.
Note: Your Throttlepack 9950 will
remember the last direction used after powering down.
2
*THREE YEAR LIMITED WARRANTY
Model Rectifier Corporation (MRC) will, subject to the conditions explained and
set forth below, repair at its expense, within three calendar years from the date of
sale, any component of this MRC product which is proven defective by reason of
improper workmanship or materials. MRC will repair said component(s) without
charge for necessary parts or labor. If the unit cannot be repaired, it will be
replaced with another unit or similar product of equal or greater value.
CONDITIONS
1. Limitation to original purchaser and proof of date of purchase: The
obligations of MRC set forth herein shall only extend to the original
purchaser. The burden of proof as to the date of purchase is on the
purchaser, thus it is recommended that you retain your bill of sale or sales
receipt and include it with the return of your product, keeping a copy of the
same for your records. This bill of sale or sales receipt must have the date of
purchase and the name and address of the dealer.
2. Validation of the Warranty: The validity of the above state warranty is
contingent upon the original purchaser possessing an original copy of the
sales receipt that shows the product’s name and/or model number, purchase
date, name of the dealer, and the address of the dealer. The burden of proof
rests with the purchaser of the product.
3. Exclusions from Warranty: The warranty does not apply to (a) any marring,
scratching, or defects in decoration and/or finish, (b) any damage or defect
resulting from misuse, abnormal service, water, or weather damage, (c) any
damage incurred in shipping and handling, (d) any incidental or
consequential damage(s)caused by or resulting from a defect in material or
workmanship or other equipment failure, (e) any damage arising from the
product not being used in accordance with the instructions provided. Your
sole remedy shall be repair or replacement as herein above expressed.
Under no circumstances shall MRC be liable for any losses or damage,
direct or consequential, arising out of the use of or inability to use this MRC
product. No implied warranty shall continue beyond the three years from the
date of purchase. Further, any modification, alteration, or tampering with the
MRC product or any repair other than that done at the factory automatically
voids the warranty.
4. Notice: Some states do not allow limitations on how long an implied warranty
lasts or the inclusion of limitation of incidental or consequential damages, so
the above state limitations or exclusions may not apply to you. This warranty
gives you specific legal rights and you may have other rights which vary
from state to state.
5. Customers outside the continental United States, including; Hawaii, Alaska,
Canada and Mexico, must contact MRC for return shipping rates for both
warranty and non-warranty repairs. Email us at
mrcsupport@modelrectifier.com
7
