background image

 Page 5

Safety Precautions

mrcool.com

To Our Customers;

Thank you for choosing a MRCOOL home HVAC product.  Please read this manual carefully before installation 

and operation of the Universal™ Series Air Handler to ensure correct use and handling.  In addition to the 

safety precautions in the previous section, please adhere to the following guidelines and note our exceptions 

to liability.

 

1.  

This appliance can be used by children aged 8 years and older and persons with reduced physical, sensory 

or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction 

concerning use of the appliance in a safe way and understand the hazards involved. Children should not play 

with the appliance. Cleaning and user maintenance should not be made by children without supervision.

2.

  To ensure product reliability, the unit may consume power under stand-by status to maintain normal 

communication, and for preheating refrigerant and lubricant. If the unit will not be used for an extended 

period, disconnect the power supply.  Reconnect the power supply and preheat the unit prior to use. 

3.  

Ensure you have selected the proper model for the operating environment.  Improper selection may impact 

operating performance. 

4.

  This product has undergone strict inspection and operational testing before leaving the factory.  To avoid 

damage due to improper disassembly, which may impact the normal operation, please do not disassemble the 

unit without proper training and equipment.  

5.

  For technical assistance, please contact MRCOOL technical support at (270) 366-0457.

6.

  If the product is malfunctioning and/or is inoperable, please contact MRCOOL technical support at the fore 

mentioned number, as soon as possible and provide the following information:

a.

 Product Nameplate Contents (model number, cooling / heating capacity, product serial number, factory 

date)

b.

 Nature of Malfunction (specify the circumstances before and after the error occurred)

7.

  All illustrations and information in the instruction manual are for reference only.  In order to improve the 

product , we will continuously assess and innovate.  We retain the right to make necessary revisions to the 

product from time to time.  We reserve the right to revise the contents of this manual without notice.

8. 

 If the supply cord is damaged, it must be replaced by MRCOOL, a professional service agent or similarly 

qualified person in order to avoid damage to the product.

9. 

 MRCOOL, LLC assumes no responsibility for personal injury, property loss or equipment damage caused by 

improper installation and commissioning, unecessary maintenance, or failure to follow relevant federal and 

state regulations, industrial standards, and the requirements of this instuction manual.

10.

  MRCOOL, LLC will bear no responsibilities for personal injury or property damage caused by the following:

a.  

Improper use of the appliance

b. 

 Altering, maintaining, or operating the product with non-approved equipment.

c.

  Altering, maintaining, or operating the product outside of the guidelines of this manual.

d. 

 Defects caused by corrosive gas.

e.

  Defects caused by shipping damage.

f.

  Failure to abide by this instruction manual or government regulations.

g.

  Products made by other manufacturers

h.

  Natural disasters, improper installation environment, or force majeure. 

1

Appliance Overview

Summary of Contents for Universal MDUI18024































Reviews: