Studiobot TX90 Quick Start Guide
6
Software setup
Always ensure you have the right configuration for the robot
you are using, such as maximum axis speeds and accelerations.
Prior to running moves, enter in and keep to a minimum all
software axis and Cartesian limits. For example if the main axis
only needs to /-40 degrees then reduce the limit to +/
-40 degrees even though it could do +/-180 degrees. This keeps
the likelihood of operator or software errors to a minimum.
Also check the Cartesian speed and acceleration limits are set
to reasonable values.
Operational safety
Do not use around flammable gas. All electrical equipment can
generate sparks that can ignite flammable gas.
Keep the equipment dry. The system has
not
been made
weatherproof. Do not use with wet hands.
Always run moves only when standing within easy reach of the
emergency stop.
Always tell the production
company and the crew to keep
away from the robot and not
approach it when any of its red
lights are on which indicates it is
powered up. Have them sign the
appropriate safety documents
and disclaimers to ensure they
understand this and are
indemnifying MRMC if
anything happens.
Always loudly and clearly indicate to others when the rig is
about to move. Shout “Rig Moving!” if no other means exists.
When using track motion always have someone keep an eye on
the trailing rig cables to ensure they don’t get caught on
anything or anyone.
Always ensure the rig is disabled when someone has to enter
the No Go Zone.
Summary of Contents for MRMC-2000-00-JB-0053
