background image

2 Safety 

 

VST_BA1_1.0 | Version 1.0 | 07/2019

 

 

Elevated temperature 

 

j

 

CAUTION! 

 

 

DANGER OF BURNS! 

The casing of the control units may exhibit an elevated temperature. 

 

Please do not touch the casing and let all system components cool down before 
working on the system. 

2.2 

Staff qualifications 

These  operating  instructions  repeatedly  refer  to  the  qualifications  of  the  employees 
who  can  be  trusted  to  perform  various  tasks  for  installation  and  maintenance.  The 
three groups are: 

 

Specialists/Experts 

 

Skilled persons 

 

Authorized persons 

This  product  is  not  suitable  for  use  by  persons  (incl.  Children)  who  are  mentally  or 
physically disabled or do not have enough experience or sufficient knowledge of the 
product unless supervised or having attended a detailed training regarding the use of 
the control unit by a person who is responsible for the safety of this person. 

Specialists/Experts 

Specialists  and  experts  are,  for  example,  fitters  or  electrician  who  are  capable  of 
assuming different tasks, such as transport, assembly and installation of the product 
with  the  instructions  of  an  authorized  person.  The  people  in  question  must  be 
experienced in handling the product. 

Skilled persons 

Skilled  persons  are  those  persons  who  have  sufficient  knowledge  of  the  subject  in 
question  due  to  their  specialist  training  and  are  familiar  with  the  relevant  national 
occupational  protection  provisions,  accident  prevention  regulations,  guidelines  and 
generally  recognized  rules  of  technology.  Skilled  persons  must  be  capable  of 
securely  assessing  the  results  of  their  work  and  familiarize  themselves  with  the 
contents of these operating instructions. 

Authorized persons 

Authorized persons are those persons who are permitted to perform the work due to 
legal regulations or who have been approved to perform certain tasks by MRS. 

 

 

Summary of Contents for CAN I/O CC16WP






















Reviews: