LambdaDriver 400 & 800
ML46430, Rev. 07
October 2004
LD400
AC:
100 to 120 Vac, 60 Hz
or
200 to 240 Vac, 50 Hz
DC:
-48 to -60 Vdc.
LD800
AC:
100 to 120 Vac, 60 Hz
or
200 to 240 Vac, 50 Hz
DC:
-48 to -60 Vdc.
Power Cord
The AC power cord of the LDx00
must have either of the following specifications:
The power cord to be used with a 115 Volt AC configuration must be a minimum
type SJT (SVT) 18/3, rated 250 Volts AC, 10 Amps with a maximum length of 4.5
meters (15 feet). One end is terminated in an IEC 320 attachment plug, the other
in a NEMA 5-15P plug.
The power cord to be used with a 230 Volt AC configuration must be a minimum
type SJT (SVT) 18/3, rated 250 Volts AC, 10 Amps with a maximum length of 4.5
meters (15 feet). One end is terminated in an IEC 320 attachment plug. The other
end is terminated as required by the country where it will be installed.
During Operation
Do not connect or disconnect cables and/or power cords during lightning strikes or
thunderstorms.
Servicing
All servicing must be carried out only by
qualified
service personnel. Before servicing, ensure that
all
power to the LDx00 is cut off!
19
