LambdaDriver 400 & 800
ML46430, Rev. 07
October 2004
Notes
Command available only in Operational CLI.
Command
set-attr-text
Description Set text attributes.
Syntax
set-attr-text [arg #0]
where,
[arg #0]
=
<0|1|2|4|8>
0
= normal;
1
= bold;
2
= underlined;
4
= blinking;
8
= reverse video
Default
–
Example
SYS_console>set-attr-text 2
Notes
Command available only in Operational CLI.
Command
set-password
Description Change console access password.
(No argument is required with this command.)
Syntax
set-password
Default
No password; simply press
Enter
after entering the username.
Example
SYS_console>set-password
Enter old password:*******
Enter new password:************
Enter new password again:************
CLI running changed password.
Notes
The procedure for changing the console password is described in the section
No argument for this command.
system
Command
sys-stat
Description Show system status information.
Syntax
sys-stat [arg #0]
where,
[arg #0]
=
<a|s>
a =
general and ports info
s =
general info only
Default
–
Example
SYS_console>sys-stat s
Optical Access Lambda Driver - 800
Date: Jul 17 2003 Time: 11:22:18
Operative Software version : 1.1.0a
Boot Software Version : 1.0.4
CPU Card H/W Version : 1
CPU Card FPGA Version : 3
Power supply 1 is ........ : Not Working
Power supply 2 is ........ : Working
Fan 1 is ................. : OK
Fan 2 is ................. : OK
148
