451-0308
MRV Communications, Inc.
www.mrv.com
41
Alternative Port Capabilities
3. You can also control and monitor the 5150 remotely through the LX CLI. Refer to the
LX-Series
Commands Reference Guide
for a detailed explanation of the commands used to configure and
view your 5150 through the CLI interface.
4800 Power Strip Management
The 4800 -48 VDC Series family of products provides easy, practical, and secure solutions for power
distribution, power management and load-measurement for remote internetworking equipment and
branch AC circuits.
4800 Series products are available in a 4-outlet configuration. An 4800 Series offers individual
remote control over the power on/off status to a maximum of four DC powered devices. The 4800
supports -48 VDC up to 70A.
The following section explains how to connect and install the 4800.
Connecting the 4800
The 4800 Series is equipped with a single RJ45 RS-232 serial port for attachment to a PC or
networked terminal server using the supplied RJ45 to RJ45 crossover cable and RJ45 to DB9F serial
port adapter as required. See the Technical Specifications in
Getting Started with the MRV
Communications 4800 Power Control Series
for more information on the RS-232 serial port.
To connect the 4800:
1. Connect one end of the standard RJ-45 double-ended crossover cable to the serial port of the 4800.
2. Connect the other end to any LX port you have configured as a power management port.
Figure 19 - Connecting the 4800
100-240VAC
1.0A 50/60Hz
9
10
11
12
13
14
15
16
10/100 ETHNT
DIAG
100
1
2
3
4
5
6
7
8
RCV
LINK
TELCO
LINE
Serial Port
IR-4800
RJ-45 Double-Ended
Crossover Cable
LX-4000
