MSA
TECHNICAL DATA
AutoMaXX - series
17
4.9. Overhaul
The overhaul of the AutoMaXX may only be performed by MSA or an authorised
service centre.
4.10. Storage
Always store positive pressure lung governed demand valves when switched on.
To do this, push flush button.
Store the AutoMaXX with protective cap attached (
Chap. 7) in a dry, dust-free
room at approx. 20 °C.
4.11. Malfunction
In case of malfunctions, the AutoMaXX must be inspected by MSA or trained
service personnel.
5.
Technical data
Operating pressure
: 5 - 8 bar dynamic
Operating pressure for
MicroMaXX series
: 5 - 9 bar dynamic
Operating temperature : -30°C to +60°C
Approvals
: The device described in this operating manual
complies with Directive 89/686 EEC or Regulation
(EU) 2016/425, respectively.
Lung governed demand valves of the AutoMaXX
series are approved as components of a compressed
air breathing apparatus according to Section 6 in
compliance with EN 137.
DEKRA EXAM GmbH, Dinnendahlstr. 9,
44809 Bochum,Germany, Notified Body
number: 0158
