background image

MSA 

 

 

SAFETY REGULATIONS 

 

 

AutoMaXX - series 

5

 

1.  Safety regulations 

1.1.  Correct use 

The AutoMaXX is a lung governed demand valve for a compressed air breathing 

apparatus or compressed airline breathing apparatus. It is connected between 

compressed air supply and full face mask and controls the inhaled and 

exhaled air. 
The lung governed demand valve series are only permitted for specific system 

components (exact allocation 

 Chap. 6). 

 

 

Warning! 

The AutoMaXX is not an independent breathing apparatus. It must be 

used exclusively mounted on a full face mask. 
The AutoMaXX is not suitable for underwater diving. 

 

It is imperative that this operating manual be read and observed when using the 

AutoMaXX. In particular, the safety instructions, as well as the information for the 

use and operation of the apparatus, must be carefully read and observed. 

Furthermore, the national regulations applicable in the user's country must be 

taken into account for a safe use. 
Alternative use, or use outside these specifications will be considered as non-

compliance. This also applies especially to unauthorised alterations to the 

apparatus and to commissioning work that has not been carried out by MSA or 

authorised persons. 

 

Danger! 

This product supports life and health. Inappropriate use, maintenance 

or servicing may affect the function of the device and thereby 

seriously compromise the user’s life. 
Before use, the product operability must be verified. The product must 

not be used, if the function test is unsuccessful, it is damaged, a 

competent servicing/maintenance has not been made, genuine MSA 

spare parts have not been used. 

 

1.2.  Liability information 

MSA accepts no liability in cases where the product has been used 

inappropriately or not as intended. The selection and use of the product are the 

exclusive responsibility of the individual operator. 
Product liability claims, warranties also as guarantees made by MSA with respect 

to the product are voided, if it is not used, serviced or maintained in accordance 

with the instructions in this manual. 

Summary of Contents for AutoMaXX Series























Reviews: