Automatic battery chargers
CH-105, CH-105-24
7
For more information on the Product functional elements, controls, LCDs and
LEDs, see Table 2.
Table 2 – Functional elements, controls, LCDs and LEDs
№
Element
Type, size, identi-
fier
Description
1
LCD
«Voltage, V»
Displays current charge (discharge) voltage and
menu items: «U», «I», «t», «Pdd»; for more infor-
mation see 2.3.5
«Current, А»
Displays present charge (discharge) current, defined
values of current or charge, SB temperature and
deep discharge protection status «OFF» or «ON»;
for more information see 2.3.5
2
Operation
mode
LEDs
«Power»
Glowing if power is available
«Normal»
Glowing during final stage of SB charge, i.e. when
charger is in voltage stabilization stage (the SB is
approaching values defined by user)
«Charging»
Glowing during main stage of SB charge, i.e. when
charger is in current stabilization stage
«Failure»
Glowing in case of SB discharge or the Product mal-
function or no input voltage
3
Controls
«SELECT»
Menu select button
Navigation buttons to set values of relevant menu
item
«SET
MUTE»
Switches on (off) alarm mute function. Button to
confirm (save) selected value and mute sound signal
while light alarm signaling is still working
4
Piano type switch
(on/off) with back-
light
–
Switches on (off) the charger
5
Stud
М5х15
Main grounding element of the Product
6
Cable gland
MG-16
Connect the Product to power mains and peripheral
equipment: DTS-135, BPC-136, AU-106 (AU-206)
7
Cable gland
MG-25
8
Cable gland
MG-32
9
Cable gland
MG-20
Note – Numbers are shown in Figures 1 and 2.
The Product includes visual, sound and relay alarm of abnormal situation, see
Table 3.
Summary of Contents for CH-105
Page 2: ......
