GB
Order No.: 10084447/00
LED indicators
Battery charging status indicator
LED green
LED yellow
LED red
LED red flashing
=
=
=
=
fully charged
50 % residual capacity
residual capacity for approx.
15 min more
empty
Status indicator
LED green
LED green flashing
LED off
=
=
=
Camera is switched on
Energy saving mode
Camera is switched off
Overheating warning
LED off
LED red flashing
=
=
Operational temperature range
Overheating danger
Switching on in normal mode
(1) Press ON / OFF button for approx. 1 second.
(2) Direct the camera towards an object or person until the
thermal image is shown on the display.
Changing over to standby mode (energy saving mode)
(1) Keep ON / OFF button pressed until the display switches off
and the green status LED flashes.
(2) Changing back to normal mode: press ON / OFF button
again until the display switches back on and the LED status
remains continuously illuminated green once again.
Switching off
(1) Keep the ON / OFF button pressed for approx. 4 seconds
until all LED indicators switch off.
Replacing the Batteries
(1) Hold the camera upside down, such that the battery
compartment faces upwards.
(2) Open the lock, unhook the battery compartment latch and
open the lid.
(3) Place charged battery in the battery compartment.
(4) Close the battery compartment lid, hook on the latch and
close the lock.
