PREPARING THE C420 PAPR FOR USE
3. Once the canister is
attached, align the feet
of the spark cover with
the inlet hole of the
canister.
4. Grasp the outside of
the canister, twist and
push on the spark
cover. The spark cover
will snap in place.
5. To remove the spark cover, gently squeeze the outside
of the cover, twist, and pull the spark cover off.
6. Check the spark cover before each use to ensure no
sparks have created holes or warped the part. If holes
are created or the part is warped, replace the spark
cover with a new one.
The FireHawk M7 Responder PAPR is now ready for use.
The user must follow the donning procedures before actu-
al use of the respirator.
12
TAL 804 (L) Rev. 0 - 10086003
motion for attaching
spark cover
check for optional spark
arresting material
Spark Arresting
Material
Summary of Contents for FireHawk M7 Responder PAPR
