5
Latchways PRD descender device user instructions
The User shall read and understand the user instructions before use and shall follow
the user instructions when using the equipment. These instructions and corresponding
inspection records shall be retained for future reference and should be used as part of an
employee training programme.
It is essential for the safety of the user that if the Latchways PRD descender device is resold
outside the original country of destination, the reseller shall provide instructions for use,
maintenance, periodic examination and repair in the language of the country in which the
device will be used.
Before use it shall be ensured that the serial number of the descender device matches those
listed on the certificate of conformity and equipment record sheet.
Intended purpose
The Latchways PRD descender device, combined with an Approved harness, is intended to be used
as part of a fall arrest system and, in the event of a fall, the descender device can be activated by the
User or Rescuer to lower the User safely to a lower level. The Latchways PRD decent device can be
used for one descent only. Once activated, the descent speed is automatically limited and requires
no further input from the User. The Latchways PRD descender device shall be a personal issue item.
Descender model number
68220
Maximum descent height
65 ft / 20 m
Descent energy
25,300 ft/lbF / 34,300 J
Descent line type
3/16 in (5.4 mm) diameter Ultra-High Molecular Weight
Polyethylene (UHMwPE) core, Aramid overbraid rope
Personnel requirements
The Latchways PRD shall only be used by a person who is trained and competent in its safe use.
Fitness and age significantly affect a person’s ability to safely withstand fall arrest loads. Only people
who are physically and mentally fit and healthy, not under the influence of drugs or alcohol are
permitted to use this equipment. Medical advice should be sought if a User’s suitability is unclear.
The Latchways PRD shall not be used by pregnant women or minors.
Product limitations
The Latchways PRD shall only be used within it’s limitations and the purpose for which it is intended.
All examinations shall be conducted by a Competent person. No attempt shall be made to modify
or repair the equipment. All instructions shall be followed to ensure the safety of the User. Approved
harnesses shall be changed by Technicians in accordance with MSA' instructions.
• Only Approved harnesses on the Latchways PRD Approved harness list (available at
MSAsafety.com) shall be used with a Latchways PRD descender device.
• Total User weight (including tools) 130 lbs min - 310 lbs max (59 kg min – 140 kg max).
• The Latchways PRD is for a single User, for rescue purposes only.
EN
