Power supply unit
PS-203-60
Page 7
1.4
M
EASUREMENT INSTRUMENTS
,
TOOLS AND APPLIANCES
Table 4 below describes consumables required for the TS.
Table 4 – Consumables required for the TS
Name and identifier of consumables
Amount of
consumables
Note
Cleaning cloth
0.10 kg
1
To clean the Product surfac-
es – use clean cloth
2
To remove severe contami-
nation – use cloth soaked in
alcohol
Rectified hydrolytic technical ethyl alcohol
0.05 l
To soak cloth when removing
contamination from a screen
Varnish
0.05 kg
To cover surfaces of the Prod-
uct in case of paint coating
damage
Abrasive cloth
0.06 х 0.06 m
To polish surfaces of the
Product in case of paint coat-
ing damage
1.5
M
ARKING AND SEALING
The Product has a nameplate displaying the name, input and output voltage,
power consumption and output power, protection degree, weight, serial number and date
of manufacturing.
Sealing of the Product is not provided.
1.6
P
ACKAGING
When delivered, the Product is packed in a corrugated board box and inner
packaging (air bubble film) ensuring its transportation and storage at the warehouse.
Transport packaging is also used as a returnable packaging for transportation of
the Product to the repair location and back.
Sealing of packaging is not provided.
