ULTRA ELITE RESPONDER FACEPIECE
ClearCommand Communication System
Note:
If upgrading from a speaking diaphragm to the
ClearCommand Communication System, remove the
speaking diaphragm. (See
Removing the Speaking
Diaphragm
for instructions.)
Removing the ClearCommand Communication System
Note:
It is not necessary to remove and disassemble the
component housing to replace the ClearCommand
Communication System.
1. Use a Phillips
screwdriver to remove
the lens ring screw.
2. Use a Phillips
screwdriver to remove
the component housing
ring screw.
3. Remove the component housing cover. (See
Removing the Component Housing Cover
for
instructions.)
4. Slide the bracket off of
the facepiece.
5. Use a small Phillips
screwdriver to
disconnect the
ClearCommand
microphone from
the mounting bracket.
6. Remove the nosecup.
7. Unscrew and remove
the speaking
diaphragm retaining
ring.
8. Remove the
ClearCommand
microphone.
18
TAL 012 (L) Rev. 1 - 10096395