E
N
GLISH
2
Pro-Source
Man. cod. B411107FG
MSC
GENERAL INFORMATION AND SAFETY
INSTRUCTIONS
1General Information and Safety instructions
Glossary
01. Head
02. Neck
03. Shoulder
04. Blade
05. Tip
06. Back
07. Bitting
Edge cut keys
A "edge cut" key is a key cut by removing
material from the external sides of the
stem.
Laser-Style keys
Such keys are called “laser” on account of
their special bitting style across the profile.
Key sample
The “original” key from which, through de-
coding, a duplicate key is obtained.
Key blank
A key with no engraving that is cut following
the profile of the key sample.
The user's and maintenance manual of the “
Pro-Source
” for the
duplication of automotive laser and edge cut keys, contains all
operation instructions on the best way to use the machine while
guaranteeing the safety of operators.
1.1.0
Scope and contents of the manual
This manual provides basic information on the installation, oper-
ation and maintenance of the key duplicating machine.
Users must follow the instructions contained in this manual
scrupulously, especially those concerning safety norms and ordi-
nary maintenance.
1.1.1
How to store the manual
The manual must always be kept with the machine it refers to.
The manual must be stored in a safe place, away from dust and
moisture and it must be accessible to all users who shall consult
it any time they are in doubt on how to operate the machine.
1.2.0
Manufacturer's address
MSC Industrial Supply Co.
525 Harbour Place Drive
Davidson, NC 28036
866-438-6767, Option #2
Website: www.mscdirect.com
E-mail: keymachines@mscdirect.com
To facilitate communication please state:
-
the name of the customer;
-
the machine identification data contained in the machine
data plate.
1.3.0
Working conditions
1.3.1
Intended use
The key cutting machine described in this manual has been de-
signed for the electronic code cutting and duplication of auto-
motive laser and edge cut keys.
Warning:
Important!
It is not possible to cut and decode painted keys or key
made of non-conductive material.
1.3.2
Improper Use
The improper use of the machine includes using the tool to per-
form an operation that it was not intended for. Should this occur
the manufacturer shall take no responsibility for damage to ma-
terials or persons and shall consider all warranties on the ma-
chine void.
1.4.0
Safety legislation
The key duplicating machine was designed and produced in com-
pliance with the harmonised standards from time to time in force
and complies with the Essential Health and Safety Requirements
of Annex I to the Machinery Directive
2006/42/EC
.
Moreover, key duplicating machines produced by
Keyline S.p.A.
satisfy the requirements of the Low Voltage Directive 2014/35/
EU and Electromagnetic Compatibility Directive 2014/30/EU.
Warning:
Important!
Users must be informed about the instructions con-
tained in the following screens.
Users must carefully follow the instructions contained
in this manual.
1.4.1
General safety requirements
Warning:
Important!
Make sure that the grounding system is well
connected.
Always unplug the machine (turn off the main switch)
before servicing mobile parts that are electrically
operated.
Do not pour water or other liquids onto electrical cables
and connections.
1
2
4
7
5
3
6
Summary of Contents for Pro-Source
Page 2: ......
